Auction #

HEAT TREATING, PLATING, AND METAL WORKING EQUIPMENT ONLINE AUCTION

Description

HEAT TREATING, PLATING, AND METAL WORKING EQUIPMENT ONLINE AUCTION 3614 HIGHPOINT ST. SAN ANTONIO, TX 78217 ONLINE ONLY AUCTION BIDDING OPENS APRIL 29TH AT 1PM CDT LOT 1 ENDS ON MAY 5TH AT 1PM CDT WITH A 1 MINUTE STAGGER PREVIEW: TBD  REMOVAL: TBD GALLIVAN IS PLEASED TO OFFER THE ASSETS IN SAN ANTONIO, TX. THIS FACILITY […]

Auction Dates

Start: 04/29/2026 01:00 PM
End: 05/05/2026 01:00 PM

Address

3614 HIGHPOINT ST
SAN ANTONIO, TEXAS 78217

Category:

Description

HEAT TREATING, PLATING, AND METAL WORKING EQUIPMENT ONLINE AUCTION

3614 HIGHPOINT ST.

SAN ANTONIO, TX 78217

ONLINE ONLY AUCTION

BIDDING OPENS APRIL 29TH AT 1PM CDT LOT 1 ENDS ON MAY 5TH AT 1PM CDT WITH A 1 MINUTE STAGGER

PREVIEW: TBD 

REMOVAL: TBD

GALLIVAN IS PLEASED TO OFFER THE ASSETS IN SAN ANTONIO, TX. THIS FACILITY SPECIALIZED IN COATINGS (PLATINUM, CHROME, ALUMINIDE), HEAT TREATING, BONDING, BRAZING, AND MORE.  THIS SALE INCLUDES INDUSTRIAL HEAT TREAT FURNACES, COOLING TOWERS, MACHINING CENTERS, PRECISION METALWORKING EQUIPMENT, INDUSTRIAL DRYERS, BLENDERS, DUST COLLECTORS, QUALITY CONTROL INSTRUMENTATION, AND MANUFACTURING SUPPORT EQUIPMENT FROM A FACILITY KNOWN FOR DELIVERING COMPLEX, HIGH-PRECISION COMPONENTS WITH EXCEPTIONAL QUALITY STANDARDS.

FURNACES & COOLING TOWERS

VACUUM HEAT TREAT FURNACE, IPSEN, MDL VFC-G4-S, GRAPHITE OR ALL-METAL HOT ZONE, HIGH-PRESSURE GAS QUENCHING CAPABILITY, PROCESSES INCLUDE HARDENING, CARBURIZING, BRAZING, NITRIDING, AEROSPACE AND AUTOMOTIVE APPLICATIONS, SER# 52889, 1966, WITH MICROVAC PUMP MVP MDL 412H-II, 10 HP, SER# CC87190, WITH TRANSFORMER BANK

VACUUM HEAT TREAT FURNACE, ABAR, WITH VACUUM PUMP, STOKES, MDL 212H-11, 150 CFM PUMPING SPEED, 10 HP MOTOR, 500 RPM, ULTIMATE PRESSURE 1 X 10-2 TORR, OIL-SEALED ROTARY PISTON TYPE, WEIGHT 1,075 LBS, 3 PHASE, INLET 3″ ASA, OUTLET 2″ FNPT, NOISE LEVEL 75 DB(A), WITH SPENCER GAS BOOSTER, MDL GH-3625 HMOD, 30 HP

HEAT TREAT FURNACE, JPW INDUSTRIAL OVENS, ENCLOSURE TYPE 1, SN 001702, 480V, 2014, MAX TEMP 1200°F, CHAMBER DIMENSIONS APPROX 48″ W X 48″ D X 72″ H, ELECTRIC HEATING ELEMENTS, VERTICAL CABINET STYLE, HINGED FRONT DOOR, CHART RECORDER, SAFETY INTERLOCKS, OVERHEAD HOIST SYSTEM WITH CHAIN SUSPENSION

ELECTRIC KILN, PARAGON INDUSTRIES, MDL TNF82-3, SER# 460300, 2350°F MAX TEMPERATURE, TOP LOADING CERAMIC KILN, FIREBRICK WALLS/LID/BOTTOM, 12500 WATTS, 480V 3-PHASE, 2016

ELECTRIC KILN, PARAGON INDUSTRIES, MDL TNF82-3, SER# 493982, 2350°F MAX TEMPERATURE, TOP LOADING CERAMIC KILN, FIREBRICK WALLS/LID/BOTTOM, 12,500 WATTS, 480V 3-PHASE, 60HZ, 15 AMPS, 2023

CUSTOM BELL FURNACE COATING CHAMBER, VPA VAPOR PHASE ALUMINIDE FURNACE, 2,200 DEGREES FERENHEIT, ARGON FLOW, BASE FURNACE- W.P. KEITH FURNACE, MDL KECP 48-36-48-2400 ELEVATOR HEARTH FURNACE, SILICONE CARBIDE HEATING ELEMENT, 480v/3 PH- PLEASE SEE FULL SPEC. SHEET UNDER DOCUMENTS TAB

COOLING TOWER SYSTEM INCLUDING REYMSA COOLING TOWERS INC MDL RTU-606175-A, FRP (FIBERGLASS REINFORCED PLASTIC) CONSTRUCTION, CTI CERTIFIED, INDUCED DRAFT COUNTERFLOW DESIGN, DIRECT DRIVE SYSTEM WITH PERMANENT MAGNET MOTOR, LOW SOUND OPERATION, 25-1172 NOMINAL TON CAPACITY RANGE (RTU SERIES), REDUCED HEIGHT FOR TRANSPORT, BASIN AND BODY ONE-PIECE CONSTRUCTION, SN M46T2L114G21435496, (2) ELECTRIC PUMPS, (1) DIAPHRAGM PUMP, (1) PLATE CHILLER ITT INDUSTRIES, CONTROL PANEL, WATER TANK, ENDURAPLAS, MDL TLV01100, 1100 GALLON

COOLING TOWER SYSTEM INCLUDING REYMSA COOLING TOWERS INC MDL RTU-606175-A, FRP (FIBERGLASS REINFORCED PLASTIC) CONSTRUCTION, CTI CERTIFIED, INDUCED DRAFT COUNTERFLOW DESIGN, DIRECT DRIVE SYSTEM WITH PERMANENT MAGNET MOTOR, LOW SOUND OPERATION, 25-1172 NOMINAL TON CAPACITY RANGE (RTU SERIES), REDUCED HEIGHT FOR TRANSPORT, BASIN AND BODY ONE-PIECE CONSTRUCTION, SN M46T2L1144G21435497, (2) ELECTRIC PUMPS, (1) DIAPHRAGM PUMP, (1) PLATE CHILLER ITT INDUSTRIES PART #SY54900033200, 2005, SN 962442-61, CONTROL PANEL, WATER TANK, ENDURAPLAS, MDL TLV01100, 1100 GALLON, (1) PUMP BOKEN

BLAST CABINETS, DRYERS, BLENDERS & DUST COLLECTORS

WALK-IN BLAST CABINET, BLAST-IT-ALL, MDL ROOM 9′ X 10′ X 10′ LP, 9 FT WIDTH X 10 FT DEPTH X 10 FT HEIGHT, SER# 170827193, LOW PROFILE (LP) DESIGN, HEAVY-DUTY CONSTRUCTION, INCLUDES DUST COLLECTOR, MEDIA RECOVERY SYSTEM, LIGHTING, SAFETY INTERLOCKS, 2012, WITH BLAST-IT-ALL DUST COLLECTOR AND BLAST POT, PIRATE BRAND, SPR SERIES

WALK-IN BLAST CABINET, CLEMCO, MDL PDQ RM,PREDESIGNED WALK-IN BLAST ROOM, 10-12 FT WIDTH OPTIONS, 8-12 FT HEIGHT OPTIONS, 10-30 FT LENGTH, 10-GAUGE GALVANIZED STEEL CONSTRUCTION, BOLT-TOGETHER PANELS, CDF-6 DUST COLLECTOR 6,600 CFM (8 FT HEIGHT) OR CDF-8 8,800 CFM (10-12 FT HEIGHT), 20-25 HP DUST COLLECTOR, PNEUMATIC OR MECHANICAL RECOVERY SYSTEM, CDF-6, 460/3/60, WITH BLAST POT, 2019

(2) BLAST CABINET, CENTRAL PNEUMATIC, MDL 93608, 40 LB CAPACITY, 125 PSI MAXIMUM PRESSURE, 12-16 CFM @ 70-115 PSI REQUIRED, 19 GAUGE STEEL CONSTRUCTION, DIMENSIONS 42″W X 30″D X 77″H (OVERALL), WORKING CHAMBER 36″W X 24″D X 58″H, INCLUDES BLAST GUN WITH CERAMIC NOZZLE, HOSE, GLOVES, VIEWING WINDOW, BUILT-IN LIGHTING, WIDE SIDE DOOR OPENING, 110V SINGLE PHASE

BLAST CABINET, SODA BLAST, SKAT BLAST, WITH SODA MASTER ATTACHMENT

V-BLENDER, PATTERSON KELLEY, MDL B-6371, TWIN SHELL DRY BLENDER, TUMBLE BLENDING OPERATION, LOW ENERGY INPUT DESIGN, STAINLESS STEEL CONSTRUCTION, (2) CHARGE PORTS WITH COVERS

AIR SCRUBBER, VANAIRE, MDL HF150, SER# 53362, 21,000 CFM CAPACITY, WET SCRUBBER SYSTEM, PACKED-BED FUME SCRUBBER CORROSION-RESISTANT CONSTRUCTION (FRP/PVC/FIBERGLASS), MECHANICAL IMPINGEMENT GAS ABSORPTION PROCESS, WATER-SOLUBLE CONTAMINANT REMOVAL, CUSTOM ENGINEERED FOR METAL FINISHING/INDUSTRIAL APPLICATIONS, INCLUDES 50 HP CENTRIFUGAL BLOWER, 460V 3-PHASE

AIR DRYER, PALL, MDL T145DHA, SER# 87GDHA J54201, HEATLESS REGENERATIVE TYPE, AMLOC ENERGY MANAGEMENT SYSTEM, -40°F DEWPOINT, 145 SCFM AT 100 PSIG, 150 PSI MAXIMUM PRESSURE, TWIN TOWER PNEUMATIC DESIGN, 115 VAC

DUST COLLECTOR, DONALDSON TORRIT, 24-CANISTER FILTER

DUST COLLECTOR, CLEMCO, 12-CANISTER FILTER

AIR SCRUBBER, SCRUB AIR VENT SYSTEMS

METAL WORKING EQUIPMENT

CUSTOM MADE PLATINUM PLATING LINE WITH 10-STATION CLEAN/RINSE/ACID/PLATING TANK; (2) HIGH VOLTAGE DC POWER SUPPLIES, VOLTEQ, MDL HY36100EX; (1) VARIABLE DC POWER SUPPLY, VOLTEQ, MDL HY5020EX; WATER COOLED AC UNIT MOVIN COOL OFFICE PRO W20; (2) PLATE STIRRERS; ANALYTIC BALANCE SCALE; WORK TABLES; EXHAUSTS; PUMPS; PUMP RACKS; HOLDING TANKS; CONTROL PANEL; SPARE PARTS; CUSTOM CLEAN ROOM; WITH ADDITIONAL PARTIAL LINE ADDITIONAL, PUMPS AND PARTS

PLASMA WELDING BOOTH, JAC, ENGINEERED NOISE CONTROL SYSTEM, WITH MILLER PLASMA TECHNOLOGIES PLASMADYN POWER UNITS, MDL PS615, 51 KW, 3 PHASE, INDUSTRIAL PLASMA WELDING POWER UNIT, ENCLOSED ENGINEERED NOISE CONTROL SYSTEM, INCLUDES JAC BOOTH, CHILLER SYSTEM, DESIGNED FOR PRODUCTION WELDING OPERATIONS, PLASMADYN SERIES POWER SOURCE, WITH CHILLER, SIZE UNKNOWN

PLASMATRON CONTROL UNIT, PLASMADYNE, MDL 3600, SER# 3113, PLASMA SPRAY SYSTEM CONTROLLER, ARC CURRENT AND VOLTAGE REGULATION, GAS FLOW CONTROL (PRIMARY AND SECONDARY), POWDER FEEDER CONTROL INTERFACE, DIGITAL DISPLAYS FOR MONITORING

ARC SPRAY SYSTEM, THERMACH INC, MDL AT-400, ELECTRIC ARC SPRAY (EAS) SYSTEM, THREE-PHASE SCR RECTIFIED CONSTANT POTENTIAL DC POWER SOURCE, ARC VOLTAGES 18-40 VOLTS, OPERATION 100-400 AMPS AT 100% DUTY CYCLE

VERTICAL BORING MILL, WEBSTER BENNETT, SER# 5348+8, 48″ TABLE, 48″ CHUCK DIAMETER, 59″ MAX SWING, TABLE SPEEDS 8.6-192 RPM (12 SPEEDS), FEED RATES 0.005-0.250 IPR, 25-40 HP MAIN MOTOR, 5 POSITION TURRET, VERTICAL FEED 26″-38″, SONY DRO MDL LH32

VERTICAL MILL, SHARP, 3 HP, SER# 60702404, RAPID TRAVERSE, 3 HP MOTOR, RAPID TRAVERSE, VARIABLE SPEED, HARDENED AND GROUND BOX WAYS, SPINDLE RUN OUT 0.0002″-0.0004″ TIR, DOUBLE-NUT BACKLASH ELIMINATOR, HEAD SWIVEL 90 DEGREES SIDE-TO-SIDE, WITH DRO, ACU-RITE, MDL 203 3X

GAP BED LATHE, CUBIC, MDL LS-18606, HARDENED AND PRECISION GROUND GUIDEWAYS, HIGH RIGIDITY SPINDLE SYSTEM, INTERNAL AND EXTERNAL TURNING, TAPER TURNING, FACING, THREADING (INCH/METRIC), DRILLING, REAMING, SN 894, WITH DRO NEWALL MDL DP700

BLOW OUT MACHINE, W/ GRIT REMOVAL FIXTURE, TX00-904

PASS THROUGH UV CURE SYSTEM, SYSTEMATIC AUTOMATION ULTRA LIGHT

SURFACE GRINDER, BOYER SCHULTZ, CHALLENGER DELUXE, 2A

PEDESTAL GRINDER, BALDOR, MDL 800W, 8 INCH WHEEL DIAMETER, 3/4 HP MOTOR, SINGLE PHASE, 115V OR 230V

METAL BRAKE, CENTRAL MACHINERY, 36 INCH

SURFACE GRINDER, BOYER SCHULTZ, CHALLENGER DELUXE, 2A

BENCH GRINDER

MATERIAL HANDLING

BIG JOE ELECTRIC PALLET JACK, MDL 1518-T10, 1,500 LB CAPACITY, ELECTRIC POWERED, 12 VOLT BATTERY SYSTEM, STRADDLE STACKER CONFIGURATION, SHAFT-TYPE ADJUSTABLE FORKS, CHROME-PLATED LIFT CYLINDER, PRESSURE COMPENSATION LOWERING VALVES, BUILT-IN BATTERY PACK AND CHARGER, SN 38218, 1500 LB, ELECTRIC

ELECTRIC PALLET JACK, MDL M-22-11B, 2200 LB CAPACITY, 12 VOLT BATTERY SYSTEM, ELECTRIC POWERED LIFT, ERGONOMIC PUMP HANDLE, 27″W X 45″L FORK SIZE TYPICAL, COMPACT DESIGN FOR TIGHT SPACES, DURABLE STEEL CONSTRUCTION, SN 52710003, UNKNOWN WORKING CONDITION

WALK BEHIND FORKLIFT, CROWN, MDL 20MT, 2,000 LB CAPACITY, 24″ LOAD CENTER, 24 VOLT ELECTRIC, 2-STAGE TELESCOPIC MAST, 90″/110″/130″ LIFT HEIGHT OPTIONS, 71.5″-91.5″ COLLAPSED HEIGHT, 42″ FORK LENGTH, ADJUSTABLE STRADDLE, 1300-1455 LBS OPERATING WEIGHT, BUILT-IN CHARGER 120V 10 AMP, KEY SWITCH, POWER DISCONNECT, COMPACT WALKIE STACKER DESIGN

WALK BEHIND PALLET JACK, BARRETT, ELECTRIC, UNKNOWN WORKING CONDITION

FORKLIFT BOOM

GENERAL EQUIPMENT

AIR FLOW RIG, FLEMING + ASSOC, MDL AF-36, AIRFLOW MEASUREMENT SYSTEM, COMPUTERIZED DOUBLE BLOWER SYSTEM, MEASURES AERODYNAMIC AREA OF GAS TURBINE COMPONENTS, PRESSURE SELECTIONS 0.5″, 1.0″, 5.0″ H2O, POSITIVE DISPLACEMENT BLOWER WITH AC MOTOR SPEED CONTROL, MEASURES AREAS 0.265 TO 150+ SQUARE INCHES

ARGON CABINET, CLEATECH, MDL CB2, PORTABLE ISOLATION GLOVE BOX, TWO GLOVE PORTS, CLEAR ACRYLIC OR PVC CONSTRUCTION, INERT ATMOSPHERE CONTROL SYSTEM, NITROGEN/ARGON GAS PURGING CAPABILITY, 10″X10″ SIDE DOOR OPENING, GAS-IN PORT AND PRESSURE RELIEF VALVE

HARDNESS TESTER, ROCKWELL, SN 3658 / HT102

(2) SURFACE PLATES, 48″ X 36″

GROUP OF (5) MICROMETERS

POLY STRAP MACHINE, ULINE, MDL H-959, 10-100 LBS TENSION, SER# 1712256371, PRE-SET STRAPPING LENGTH 0-18′, STRAPPING WIDTHS 1/4″-5/8″, 110 VOLTS, 1/4 HP, STAINLESS STEEL TOP, MAX WEIGHT CAPACITY 250 LBS, CORD IS CUT, UNKNOWN WORKING CONDITION

BLAST CABINET, SODA BLAST, SKAT BLAST, WITH SODA MASTER ATTACHMENT

WATER CONDITIONING TANK, MUELLER, 150 PSIG MAX PRESSURE

FAN PACKAGE: (1) BIG ASS FAN, 48 INCH, CORD CUT, UNKNOWN WORKING CONDITION; (3) PEDESTAL FANS

(4) POLY CONTAINERS, ENPAC, 95 GALLON, WITH LIDS

FLAMMABLE CABINET WITH STORAGE CABINET AND SHELF

BANDING CART WITH TOOLS

STORAGE CONTAINER, ESTIMATED 50 FEET, NO CONTENTS

AIR COMPRESSOR, KOBALT, 26 GALLON

TOOL CAGE, 103″ X 150″ X 98″, ULINE, LOCKING (NO KEY)

CHEMICAL STORAGE CONTAINER

SHOT PEEN CABINET, ICM, MODIFIED 4800-3-010601

H-FRAME PRESS, ENERPAC, 50 TON

TRANSFORMER, SQUARE D, 3 PHASE, 150 KVA, TYPE 2 ENCLOSURE, HV 480

(2) WELDING TABLES

CANTILEVER RACK, ULINE, WITH CART

CANTILEVER RACK, ULINE, WITH (2) CARTS

BENCH GRINDER

MORE INFORMATION COMING SOON!

Disclaimer: Some equipment specs are AI-generated from seller-provided data. Buyers should inspect items and verify specifications before bidding. All sales are as-is, where-is.

TERMS OF SALE – MEYER TOOL

An 18% Buyer’s Premium will apply to all Internet and Proxy Bids. Payment for all purchases must be made in full within 24 hours of the sale.

VISA, MasterCard, Discover, American Express, and Wire Transfers accepted day of sale. All purchases over $3,000 must be made via wire transfer.

Everything sells “As Is/Where Is”. Descriptions are believed to be correct, the auctioneer and the owner make no warranties or guarantees, expressed or implied, as to the condition, authenticity of, or descriptions used in advertising. It is the sole responsibility of the bidder to verify condition, authenticity and description of any item prior to bidding. Once the auctioneer or online platform says “Sold,” the purchaser is responsible for payment and safekeeping of the merchandise. Removal of purchased items shall be at the expense, liability, and risk of the purchaser. Purchasers must provide certificate of insurance if they will be using large equipment for the removal of their items. No abandonment of purchased items is allowed. Purchaser will be responsible for paying the full cost of removal or disposal of abandoned items. If Purchaser fails to pay for their items, they agree to pay the difference in price if the item or items are resold. All bids and payments must be made in U.S. dollars (USD). No refunds for lost or stolen items will be made. Announcements made on the day of sale take precedence over any printed material. Advertised items may be subject to prior sale.

CALL OUR OFFICE WITH ANY QUESTIONS OR TO SCHEDULE AN INSPECTION.

AUCTIONEERS:

NORMAN J. GALLIVAN, INC.  AC32000003

Marketing Content

No marketing content available.

Preview Information

Preview Address: 3614 HIGHPOINT ST., SAN ANTONIO, TX 78217

Removal Information

No removal information available.

Checkout Information

Bidding Information

Bidding Start: 04/29/2026 1:00 pm

Bidding End: 05/05/2026 1:00 pm

An 18% Buyer’s Premium will apply to all Internet and Proxy Bids. Payment for all purchases must be made in full within 24 hours of the sale.

 

VISA, MasterCard, Discover, American Express, and Wire Transfers accepted day of sale. All purchases over $3,000 must be made via wire transfer.

 

Everything sells “As Is/Where Is”. Descriptions are believed to be correct, the auctioneer and the owner make no warranties or guarantees, expressed or implied, as to the condition, authenticity of, or descriptions used in advertising. It is the sole responsibility of the bidder to verify condition, authenticity and description of any item prior to bidding. Once the auctioneer or online platform says “Sold,” the purchaser is responsible for payment and safekeeping of the merchandise. Removal of purchased items shall be at the expense, liability, and risk of the purchaser. Purchasers must provide certificate of insurance if they will be using large equipment for the removal of their items. No abandonment of purchased items is allowed. Purchaser will be responsible for paying the full cost of removal or disposal of abandoned items. If Purchaser fails to pay for their items, they agree to pay the difference in price if the item or items are resold. All bids and payments must be made in U.S. dollars (USD). No refunds for lost or stolen items will be made. Announcements made on the day of sale take precedence over any printed material. Advertised items may be subject to prior sale.

 

CALL OUR OFFICE WITH ANY QUESTIONS OR TO SCHEDULE AN INSPECTION.

AUCTIONEERS:

NORMAN J. GALLIVAN, INC.  AC32000003